Reviews
Facebook
Links
Downloads
History
Contacts
Home
Best viewed with
IE8 or newer @
1024x768 or
larger. Copyright
© 1997-2012 by
Club Overclocker
All rights reserved.
Legal Stuff

AMD
Cooler Master
Sapphire Tech
Futuremark Corp
Kingwin
Patriot Memory
Seagate
 

Application:

Water Cooling

Provided by:

Danger Den

Available at:

Danger Den

Review by:

Matt

Edited by:

Scott

Review date:

April 17th, 2004


 

Crucial System Scanner
 

Features

Danger Den D4 Pump

     The newest pump offering from Danger Den is a nice quiet 12v pump that specs at 18Watts of power. A small quote from Danger Den "This Danger Den DD12V-D4 pump is one of the best 12V pumps on the market.  It will run off of a standard computer power supply.  This tiny pump, size shown in Figure 1 below, will fit in almost any case.  The flow rates at various pressures proves to be better then any of the 110V pumps offered at Danger Den." 

     One of the key benefits of this pump is its instant priming, and very cool running.. Compared to the Eheim 1250 The D-4 is a whole different ball-game when it comes to heating your coolant. The D-4 definitely beats the Eheim in terms of not dissipating any heat into your system.

The flow Rate of the D-4 shows that it does quite well against previous Danger Den offerings.

Danger Den Black Ice Micro II

The BIX M2 is a must for those with small cases such as the ThermalTake A8000V used during our tests.

Specifications

2-pass Dual 80 mm Radiator specifically developed for PC CPU and GPU water cooling
Double-row high internal volume design
New superior durability custom formulation high-gloss acrylic paint finish
Rated for 570 KCal per hour (2261.91 BTU per hour) or 662.91W
180 mm x 73.4mm Double-row copper-finned core consisting of flat tubes for maximum heat conductivity
High-density copper fin configuration for enhanced heat dissipation
Built-in enhanced depth plenum chamber for increased performance and noise reduction even when using high-speed 80mm fans.
Self-tapping dual 80mm fan and case mounting holes for ease of installation
9.55 mm OD (3/8 inch) pre-angled inlet/outlet barbed hose connectors
(Also available in 6.4 mm OD (1/4 inch) barbed hose connectors)
Compact 193 x 82 x 46 mm (7.6" x 3" x 1.8") dimensions allows it to fit internally in most cases