|
|
 |
|
Application: |
Dual Processor
Motherboard |
|
Provided by: |
Iwill |
|
Review by: |
Scott |
|
Edited by: |
Matt |
|
Review date: |
December 23rd,
2002 |
|
|
|
Iwill
MPX2 Specs
| Processor |
Supports single AMD® Athlon™ MP,
Athlon™ XP or Duron™ processors
Supports dual AMD® Athlon™ MP processor
|
| Chipset
|
AMD-760™ MPX chipset
• AMD-762™ System Controller (Northbridge)
• AMD-768™ Peroipheral Bus Controller (Southbridge)
|
| Bus Frequency |
266/200 MHz sytem bus
|
| System Memory
|
4 x DIMM slots
Supports up to 4GB PC2100/1600 DDR SDRAM
Supports Registered DDR SDRAM modules (2GB max)
Supports Unbuffered DDR SDRAM modules (3.5GB max)
|
| IDE |
Dual channel ATA 100/66/33 IDE
Connect up to four (4) IDE / ATAPI devices
|
| Expansion Slots
|
1 x AGP PRO slot
• Supports AGP PRO, AGP 4X (1.5V) and AGP 2X(3.3V) modes
2 x 64-bit/66 MHz bus master PCI slots
4 x 32-bi/33 MHz bus master PCI slots
|
| I/O Interface |
2 x ATA/100 IDE connectors
1 x Floppy connector
1 x SMBus header
1 x Internal IR connector
2 x PS/2 connectors keyboard and mouse)
2 x 9-pin 16550A UART serial ports
1 x 25-pin ECP/EPP parallel port
2 x USB ports
1 x Internal WOL (Wake-on-LAN) header
1 x Internal WOM (Wake-on-Modem) header
|
| BIOS |
2 MB Phoenix Award EEPROM Flash ROM
"Bye-Bye Jumper" IWILL Smart Setting
PC99 Compliant
Support Plug and Play (PnP)
Support APM 2.1
Support DMI 2.1
Support ACPI 1.0
Year2000 Compliant
Manually assign PCI IRQ
|
| System Management |
Supports EPS 12V (24-pin + 8-pin) or
ATX 12V (20-pin + 4-pin) power supply
Power on by LAN, Modem, RTC, PME
Resume by LAN, Modem, PS/2 keyboard and mouse, RTC, PME
Supports ACPI, APM, DMI
Supports BIOS ROM flash control (S/W protection)
Supports Power-on after power failure
|
| Hardware
Monitoring |
IWILL Processor Shelter (IPS)
• Processor overheat protection
Voltage monitoring
• +12V | +5V | Vcore | CIO
Fan speed control monitor
• 2 x AUX fan connectors (always ON)
• 1 x system fan connector (ON/OFF control)
System temperature sensor
Processor temperature sensor
Chassis intrusion detection
|
| Board Size |
Extended ATX Form Factor
12 in x 11.4 in (305mm x 290mm)
6 layer PCB
|
| Package Contents |
1 x IWILL MPX2 motherboard
1 x Users' manual
1 x IWILL Power Installer CD
1 x ATA/100 IDE cable
1 x Floppy cable |
Next
Page >> Specs Continued
|
|
|
